AUTOart Easter Egg: McLaren F1 LM Edition • Diecastsociety.com

AUTOart Easter Egg: McLaren F1 LM Edition

Author/Model:
Kickinoutyo
AUTOart McLaren F1 LM Edition

Tools & Supplies:
Screwdriver
Patience

STEP 1 – 4.
STEP 5 – 6.
autoart_mclarenegg


Remove 6 bolts that I indicated in ‘Green’.  Then pry out tires very carefully. Next remove 2 bolts in red area. (These two bolts holds the rear bumper in place). 
After removing 2 bolts in red area, slowly wiggle the rear bumper loose (Bottom chassis is pretty loose at this point and you should be able to wiggle the rear bumper off).

autoart_mclarenegg2


You should be able to get to the single bolt that’s holding the lid shut.If you can’t not get to the bolt this way, go ahead separate the chassis from the body. It should be very easy to do ,so don’t be afraid ,but I doubt you have to do that to get
to the bolt.

PHOTOS OF EXHAUST WHEN OPEN.
MORE…
autoart_mclarenegg3
spacer

As you can see along with the BMW M-Power, which includes key elements of the exhaust system are highly detailed and hidden away.

autoart_mclarenegg4


MORE…
STEP 7.
autoart_mclarenegg5


autoart_mclarenegg6
spacer

Decide whether to keep the bolt in place or not.  Reassemble model in reverse.