Removing CLK GTR from base
Removing CLK GTR from base
This might sound really dumb, but for some reason I can't work out how to remove a CLK GTR from its base. Anyone done it before?
Re: Removing CLK GTR from base
Yes, but is was many moons ago. Didn't seen challenges at the time. Post some images if possible, thanks.CCX wrote:This might sound really dumb, but for some reason I can't work out how to remove a CLK GTR from its base. Anyone done it before?
Re: Removing CLK GTR from base
Here's some photos of the screws, no idea what to use to unscrew it. I've tried everything.
- StratosWRC
- .
- Posts: 7405
- Joined: Tue Aug 27, 2013 4:56 pm
- Location: Canada
Re: Removing CLK GTR from base
it looks like they're badly worn down. Do you have a screwdriver kit? You could try some of the 6-star ones. Not sure how to explain it, but I can see it in the first pic, on the right. That's the tip you need
Re: Removing CLK GTR from base
Ya. You can also try screw extractors.StratosWRC wrote:it looks like they're badly worn down. Do you have a screwdriver kit? You could try some of the 6-star ones. Not sure how to explain it, but I can see it in the first pic, on the right. That's the tip you need
- StratosWRC
- .
- Posts: 7405
- Joined: Tue Aug 27, 2013 4:56 pm
- Location: Canada
Re: Removing CLK GTR from base
these are the tips I meant
Re: Removing CLK GTR from base
Thanks for all your help, just managed to sort it though. I think they were very worn down but eventually I managed to get some traction with a flathead screwdriver. Phew!