ACME 1970 AAR Plymouth Barracuda #42
Posted: Tue Mar 12, 2019 12:04 pm
I've been wanting a racing version of the Cuda/Challenger for a long time & was thrilled when ACME announced it. I'm sure its not perfect, but I love the way it looks & displays really well.
Some great history of the car from historictransam.com
This car (AAR chassis #50211) is the first of three Plymouth 'Cudas constructed by Dan Gurney's All American Racers (AAR) for competition in 1970 Trans-Am Championship. It was driven by Dan Gurney and Swede Savage during pre-season testing and used in all of AAR's and Chrysler's preseason promotional photographs.
It was driven by Dan Gurney in the first two races, then the rest of the Season by Swede Savage. Swede had 3 pole positions, a 2nd at Road America, and finished 5th in the driver's championship.
The car was acid dipped (then referred to as "chemically cleaned") and has many titanium parts that were carried over from Dan Gurney's Champ car & F1 efforts. The transmission was aluminum cased but sprayed with cast iron spray, to pass tech & the magnet test.
Gurney had intended to run a full season of Trans Am however budget cuts by Chrysler forced AAR to reduce its two car effort to a single car for Savage after Gurney had run just two races. Savage subsequently drove this 'Cuda for all of the remaing races of the season except Mid Ohio.
Plymouth finished fifth in the 1970 Trans-Am Championship with no wins and just 15 points, compared to Dodge’s 18 points (for fourth position). This car earned 12 of Plymouth’s 15 points.
Source: http://www.historictransam.com/Drivers/ ... uda42.html
With Highway61's street version of the 1970 AAR Cuda (ACME acquired this mold to make the racers & one would assume, more street cars).
Some great history of the car from historictransam.com
This car (AAR chassis #50211) is the first of three Plymouth 'Cudas constructed by Dan Gurney's All American Racers (AAR) for competition in 1970 Trans-Am Championship. It was driven by Dan Gurney and Swede Savage during pre-season testing and used in all of AAR's and Chrysler's preseason promotional photographs.
It was driven by Dan Gurney in the first two races, then the rest of the Season by Swede Savage. Swede had 3 pole positions, a 2nd at Road America, and finished 5th in the driver's championship.
The car was acid dipped (then referred to as "chemically cleaned") and has many titanium parts that were carried over from Dan Gurney's Champ car & F1 efforts. The transmission was aluminum cased but sprayed with cast iron spray, to pass tech & the magnet test.
Gurney had intended to run a full season of Trans Am however budget cuts by Chrysler forced AAR to reduce its two car effort to a single car for Savage after Gurney had run just two races. Savage subsequently drove this 'Cuda for all of the remaing races of the season except Mid Ohio.
Plymouth finished fifth in the 1970 Trans-Am Championship with no wins and just 15 points, compared to Dodge’s 18 points (for fourth position). This car earned 12 of Plymouth’s 15 points.
Source: http://www.historictransam.com/Drivers/ ... uda42.html
With Highway61's street version of the 1970 AAR Cuda (ACME acquired this mold to make the racers & one would assume, more street cars).